①To ensure that the steel is flat,the seam can be welded for one side or for both sides
②The deviation on the back side is no larger than ±0.5mm, with the obverse no larger than 2mm and the reverse side 1mm. ③The width of the welding seam is 5-12mm
④ There is no minimal deformation.
⑤There are clean and beautiful seam on both sides, round and smooth transfers.
– Welding Length(can be customized): 9500mm
– Welding Metal Base : Q235A,16Mn,SUS304
– Thickness of the Metal Base : 3-8mm
– Adjustment of the Welding Speed : The Stepless Adjustment
– Welding Speed : 100-1500mm/min
– Operation Precision of the Welding Torch :The Welding Torch can be Adjusted by Hand or Electromotion
– Pressure of the Pneumatic System : 0.4-0.8MPa
– Effect of the Welding Seam : One-Side is Welded; Two Sides are Shaped.
– Way of Pressing the Work Piece : The Cylinder Keyboard Pressed
– Weight : 20 T
– APPROVAL STATUS:ISO9001:2000 / 3C